Express 40 Spares

The plastic truss bar bracket and bolt that is used to connect a pair of truss bars together.

The dome shaped cap that fits on to the top of the upper peak pole section.

This pull pin bracket is used to adjust the leg height position. The same bracket fits any of the four sides.

This bracket is designed to fit any corner leg in the Express 40 range. For middle legs please see Middle Leg Top Bracket.

A bracket that three truss bars connect into towards the top of the frame.

The bracket that slides up and down the middle leg of a 3m x 6m when the frame is expanded and collapsed.

The lower bracket in the peak pole section that the peak pole and four truss bars connect into.

Triangular shaped metal foot plate with three drilled holes

This bracket is the one that slides up and down the leg as you expand and collapse the frame.

A bracket that three truss bars connect into towards the bottom of the frame.

The bracket that sits on the top of the middle leg of a 3m x 6m, with three truss bars connecting into it.

The upper bracket in the peak pole section that the upper peal pole fits through and four truss bars connect into.

The lower half of the aluminium peak pole section that supports the canopy.

Truss bar to fit 3m x 3m, 3m x 4.5m and 3m x 6m frame sizes.

The upper half of the aluminium peak pole section that supports the canopy.

This part is the inner leg, referred to as the Lower Leg Section. This lower leg comes complete with a metal foot plate, and slides into the upper leg section without the need for any further parts.

The Upper Leg Section is the longer outer leg that the lower leg slides into. This part is not supplied with the top corner bracket, sliding corner bracket or pull pin bracket but does come complete with hook & loop pad in situ.