Hex 50 Spares

The plastic truss bar bracket and bolt that is used to connect a pair of truss bars together.

The dome shaped cap that fits on to the top of the upper peak pole section.

The bracket that sits on the top of the middle leg of a 3m x 6m or 4m x 8m, with three truss bars connecting into it.

Triangular shaped metal foot plate with three drilled holes

This bracket is the one that slides up and down the leg as you expand and collapse the frame.

A bracket where three truss bars connect towards the frame's top and bottom.

The bracket that slides up and down the middle leg of a 3m x 6m or 4m x 8m when the frame is expanded and collapsed.

The upper bracket in the peak pole section that the upper peal pole fits through and four truss bars connect into.

This pull pin bracket is used to adjust the leg height position. The same bracket fits any of the four sides.

This bracket is designed to fit any corner leg in the Pro 50 range. For middle legs please see Middle Leg Top Bracket.

The lower bracket in the peak pole section that the peak pole and four truss bars connect into.

A single truss bar that fits our 3m x 3m, 3m x 4.5m and 3m x 6m frames.

The upper half of the aluminium peak pole section that supports the canopy.

The lower half of the aluminium peak pole section that supports the canopy.

A single truss bar that fits our 4m X 4m, 4m X 6m And 4m X 8m frames.

This part is the inner leg, referred to as the Lower Leg Section. This lower leg comes complete with a metal foot plate, and slides into the upper leg section without the need for any further parts.

This part is the inner leg, referred to as the Lower Leg Section. This lower leg comes complete with a metal foot plate, and slides into the upper leg section without the need for any further parts.

The Upper Leg Section is the longer outer leg that the lower leg slides into, specific to 3x3m, 3x4.5m and 3x6m frames. This part is not supplied with the top corner bracket, sliding corner bracket or pull pin bracket but does come complete with hook & loop pad in situ.

The Upper Leg Section is the longer outer leg that the lower leg slides into, specific to 4x4m, 4x6m and 4x8m frames. This part is not supplied with the top corner bracket, sliding corner bracket or pull pin bracket but does come complete with hook & loop pad in situ